How To Field Strip A Glock

Glock iv Principal Parts

Glock 17 or Glock 19 Cleaning Instructions. Glock Field Strip (disassembly), Lubrication and Reassembly

I am going to testify you step-by-step how to disassemble and clean a Glock 17, Glock 19 9mm pistol. In fact, all Glock pistols come up apart the same way, so these instructions will work on any Glock!

From the field stripping to complete reassembly, these Glock cleaning instructions volition show you how to quickly and confidently perform this task in 15-xx minutes.

If yous have never tried to take down (field strip) your Glock 17 or Glock 19, yous volition before long see how piece of cake it is to accomplish without fifty-fifty using any tools. The pattern is excellent so anyone can hands maintain their firearm.

Related Glock Manufactures:

How to Install a Glock Backstrap

Field Stripping the Glock 17 or Glock 19.

This is pretty straight forward as all Glock guns are very well-designed to come apart and clean easily. After doing this once, you will be able to do information technology even quicker the side by side time without instructions!

All Glock pistols disassemble the same style

These Glock disassembly instructions volition work to field strip the Glock 17, G19, G26, G34, G43, G45 and G48 (all 9mm models).

Y'all can also field strip the Glock 22, G23, G24, G27 and G35 (All .twoscore quotient models).

As well, yous can field strip Glock 21, G30, G36 and G41 (.45 caliber models).

There are many unlike models of the Glock pistol. The differences are in the physical size, caliber, features, etc.

Despite these differences, all Glock pistols disassemble (field strip) the same way as shown in this article.

Different gun manufacturers have different ways to field strip their handguns, especially when it comes to removing the slide, and you should always observe a tutorial before attempting to remove the slide from an unfamiliar gun for the start time.

GUN PARTS

AMMUNITION

SHOOTING GEAR

*Chapter links. kydexowbholsters.com may receive a small committee at no price to you if you employ these links. We profoundly appreciate you lot and your support!!

Note of Caution When Pressing the Trigger

All Glocks do require the trigger to be pressed during disassembly, which has resulted in negligent or unintentional discharges in the by. If you properly unload your gun and double cheque it before attempting to disassemble and/or make clean it, yous volition non have whatsoever issues.

However, pressing the trigger at any time other than when y'all are on the range, sighted in, is a violation of the second rule of firearm prophylactic. The rule is, "Never put your finger on the trigger until the gun is sighted in on a target and yous are ready to shoot."

If y'all have never tried to take downward (field strip) a semiautomatic gun, rest easy as it is not difficult or complicated. At to the lowest degree not the Glock 17 or Glock 19 or any other Glock model.

Glock 17 Cleaning Supplies

Here are the supplies you will need to complete the disassembly and cleaning of most semi-automatic pistols. In that location are lots of different cleaning products, and so I will list the ones I have used for years of trouble free results.

These are affiliate links so kydexowbholsters.com will receive a small commission at no toll to yous if you shop through them. Information technology is greatly appreciated!

• Original Gun Oil (Veteran Endemic. Utilize Discount code SAVEWITHDAVE for 10% off)
• Hoppes Boresnake or equivalent (this will relieve you time and effort)
• Existent Gorging Bore Boss (New Style Bore Snake)
• Gun Brush
• Micro fiber cloth or Cutting-upwards cotton T-shirt
• Cotton swabs or lint-free swabs
• Otis Gun Cleaning Pipe cleaners

Encounter this article on setting up a DIY Gun Cleaning Station.

THE ONLY CLEANER & LUBE YOU Need

FOR ALL YOUR GUNS

Original Gun Oil CLP

Salve 10% + Free Shipping with Promo Code: "SAVEWITHDAVE"

I use Original Gun Oil on all my firearms. This product is a C.L.P. (Cleaner, Lube & Protectant) that is Non-Toxic, Not-Staining and Non-Scented, making information technology safety to use in the house! Veteran-Owned business.

Instructions to Field Strip (disassemble) the Glock 17 9mm pistol

I am going to list the steps, so show detailed pictures of each step so y'all can follow along.

Step 1. Unload the gun

This is the near important step. Eject any magazine that is in the gun by pressing the magazine release button, and so remove the round in the chamber. Be sure to exercise it in that social club!Mag outset, and so empty the bedroom!Remove any and all ammo from the area.

Unload the gun by first removing the magazine

Verify in that location is no round in the chamber

Pace 2. Verify the gun is completely unloaded

This step is critical because nosotros demand to press the trigger in gild to field strip a Glock pistol!!

Lock the slide to the rear

Verify at that place is no magazine in the gun

Verify there is no round in the chamber

Stride 3. Remove the slide, the barrel, the recoil spring/guide rod associates

Point the muzzle in a safe direction and press the trigger

Grip the gun with right paw every bit pictured

Motility the slide slightly to the rear well-nigh a quarter of an inch

Locate the Take-Down levers on BOTH sides of the gun

While pulling the Take-Down levers downwardly on both sides, commencement moving the slide forrard on the frame

Continue moving the slide forward until it comes completely off the frame

Turn the slide upside downwardly and press on the recoil jump as shown

Elevator and remove the recoil spring assembly

Lift and remove the butt

Glock 17 Field Stripped for cleaning

That's it for the field strip/disassembly process of the Glock 17 or Glock 19 9mm. This is as far as you demand to go to give the gun a good cleaning, or to supplant the recoil spring. Let's move on to the Glock cleaning instructions.

How to clean a Glock 9mm

I will showtime with the barrel. Information technology does not matter which part y'all do offset. Basically we are going to apply some gun cleaner to each office and let it sit for 5 minutes or so. Then we volition clean it off with a cotton fabric. In this instance I am using Original Gun Oil (my preferred CLP. This stuff is scent free, non-toxic and non-staining).

Here are the steps:

Footstep 1. Make clean the Glock barrel and recoil spring assembly

Spread it to all surfaces

I am non using gloves because Original Gun Oil is non-toxic. If yous are using any other solvent, please utilize rubber or nitrile gloves!

Employ a few drops into the diameter of the barrel and allow information technology to coat the inside

Wait v minutes and wipe outside of the barrel clean with a cotton material

Run a Boresnake through the butt several times

The Boresnake has copper brushes integrated into the weave so it will practise a good job cleaning any lead or carbon deposits from the inside of the butt.

Brand certain the feed ramp is clean and smooth

Look through the barrel and verify that it is clean

Wipe downwardly the recoil associates with a cotton cloth. Employ some Original Gun Oil if necessary

Footstep 2. Make clean the Glock Frame

Nosotros will now movement on to clean the frame of the gun. Apply some cleaner to all the metal parts inside the frame. Use a textile or brush to spread information technology around so all the dingy areas are coated with the cleaner.

Apply a pocket-size amount of Original Gun Oil to all metal parts of the frame

Utilise a gun brush to spread the cleaner to all surfaces

Use the castor to scrub any specially dirty areas

Wait 5 minutes or longer to allow the cleaner loosen the dirt, then wipe off with a cotton cloth

Employ the gun brush to force the cloth into the tight spots

Wipe until all parts of the frame are pretty clean

Step 3. Clean the Glock Slide

The slide is where near of the action happens so we want to spend some fourth dimension cleaning this part.

Apply several drops of Original Gun Oil to all surfaces of the underside of the slide

Use a gun brush to spread the cleaner to all surfaces, including the rail cut outs along both sides

Be sure to go some cleaner on the Breech Face

Hither is what my slide looks like after I employ the Original Gun Oil

Afterwards letting the gun oil work for at lease v minutes, wipe information technology clean using a cotton cloth

Use the gun brush to force the cloth into the slide notch and other tight places

Since we are using a CLP product (Cleaner, Lubricant and Protectant) is is not necessary to remove 100% of the oil from every piddling nook and cranny. This is because any residue left over volition also lubricate and protect the gun from rust and corrosion.

Exist sure to get the Breech Confront clean

Hither is the slide after cleaning

Step four. Lubricate the Glock 17 or Glock 19 9mm Pistol

Once all the parts are clean, nosotros need to lubricate the moving parts as shown with Original Gun Oil or other quality gun lubricant. The steps below follow the Glock user manual lubrication procedures.

Apply a driblet or two of Original Gun Oil to a cotton material

Wipe downwardly all surfaces on the exterior of the barrel with the oil, leaving a light film

Wipe downwards the inside top of the slide in front of the Ejection Port

Wipe down the opening that the butt slides through in the front of the slide

Use Ane drib of Oil to the slide cut on each side

Use a gun brush to spread the oil the length of the slide cutting on both sides

Wipe down the exterior of the slide likewise

Utilise Ane drop of oil in the frame where the trigger bar touches the connector as shown

User Level Inspection

At this bespeak you should perform a User Level inspection of the gun before yous reassemble. I will accept an article for that in the next calendar week or so. In the meantime at that place is a video beneath that contains these checks.

Reassembly of the Glock 17, Glock nineteen 9mm Pistol

This part is very unproblematic with the Glock pistols. Probably the easies of all guns I have reassembled.

Identify the barrel into the slide

It should look like this

Place the recoil bound assembly into the slide with the larger plastic end facing the front

Seat the front cease, press the other stop to compress the spring slightly and identify it into the notch in the barrel

The recoil spring assembly should look like this

Flip the slide over and line it upwardly with the rails on the frame every bit shown

Move the slide direct back slowly being careful not to allow the Extractor scratch the rear of the slide

Move the slide all the way to the rear and it volition click into place

Let the slide to come forward to the home position and you lot are washed!

Final Steps to consummate the reassembly of the Glock 17, Glock 19 or any other Glock pistol.

Work the slide dorsum and along several times to be sure it operates properly, and to allow the lube to spread into all the areas that movement.

Perform the Glock User Level inspection before you lot fire the gun. These checks are integrated into the video beneath.

Video: How to Field Strip, Clean, Lubricate and Reassemble a Glock 17 or Glock 19

Video: (Short Version) How to Clean a Glock 17:

Ok, y'all are all done! That was a lot of steps simply they are easy and you lot will wing through next time!

Lastly, you should test the functionality of the gun by taking some dummy rounds and loading the gun with them. Now make certain a round is ejected every time to rack the slide to the rear.

The gun is now fully assembled and ready for another day at the range!

Thank you for letting me walk you through the field strip, cleaning, lubrication and reassembly of your Glock 17 or Glock 19 (or whatever other Glock) pistol. Keeping your Glock make clean and gear up for use is an important office of gun ownership.

See article: How to Disassemble & Clean an AR-15 rifle

If you take any suggestions, recommendations or other comments, please leave it in the annotate department beneath and I will usually reply within 24 hours.

Source: https://kydexowbholsters.com/how-to-clean-a-glock-17-or-glock-19-9mm-pistol

Share this post